The digital junction box is designed to connect upto 4 analogue load cells, and to offer the performance and the advantages of a digital load cell configuration.
It contains all transducer electronics to excite the strain gauge, amplify, filter and convert the analogue signal of each load cell to a digital form.
The signals of the 4 inputs are combined to produce a corrected and adjusted weight value. The box incorporates high performance A/D conversion including digital calibration with individual DIGITAL CORNER ADJUSTMENT.
Communication via a bi-directional serial interface allows easy connection to PC, PLC or other peripheral devices with networking capability. Two set points are standard while an analogue output board can be optionally integrated in the unit.
Standard weighing Functions are available such as Zero, Tare, Auto zero maintenance, Auto-zero on power-up, no motion detection. Its unique advantages are the electronic calibration and digital corner adjustment, which allow fast and efficient scale or silo installation, without the use of actual calibration weights and the need of trimming procedures.
The digital junction box comes in robust stainless steel housing and represents a reliable and professional solution for a multitude of weighing applications.
Standard Supply includes
Windows-based PC software for monitoring of the weight, setting and scale calibration
Conversion rate upto 40 measurements per second, analogue and digital filtering
•
Tilt input (inhibits weighing when scale tilted)
•
Two set points
•
Serial interface RS485 with networking capability
•
Stainless steel enclosure, sealed to IP65
•
Windows-based software for scale parameter setting and calibration
Operational Feature
•
Basic weighing functions: Zero, tare, automatic zero tracking, auto-zero on power-up, no motion detection
•
Digital scale calibration performed either via application of test weights or via the m V/V output values of the load cells
•
Continuous error detection
Options / Accessories
A non-approved version is also available for nonlegal-trade applications, with alternative RS232 serial interface (hardware selectable). All other features and options are the same (except the analogue output option)
•
Analogue output (0/ 4 – 20 m A)
•
Software for automatic tilt correction (for nonlegal-for-trade applications)
•
Remote display terminal RDT52-A/B, 6-digit, LED display with 6 key membrane keypad, as display and keyboard interface
•
RS485-RS232 interface with power supply
•
Mains power adapter 230VAC-9VAC
RDT 52 – Remote Display Terminal
RDT52 remote display terminal is designed as display and keyboard interface for Leon Engineering’s DJB. It provides 6-digit high visibility LED display with 5 status annunciators for the display of weight data and operator prompts. A keypad of 6 keys is used for operator interfacing.
The unit may be used in master mode whereby it may poll upto 30 DJBs connected in a network or in slave mode whereby it will only display information from a selected DJB.
The communication with the DJB is realized via the standard RS485 interface. The RDT52 can be also connected to the LD-Series indicators of Leon Engineering as a remote display terminal.
Two versions are available: Base model RDT52A may be used for approved weighing applications not requiring printouts or totalization. Extended model RDT52B may be connected to a printer or to a PC via the additional RS232 port and allow also printouts conform to the European regulations, since it is equipped with real-time-clock and Alibi memory.
Features
•
6 –digit, bright LED display, 14mm high, with 5 status annunciators
•
6 key membrane keyboard with tactile feedback
•
Connectivity with upto 30 DJBs
•
Calibration and parameterization of all DJBs connected via user-friendly dialogue-driven operation
•
ASCII serial RS485 Interface with networking capability
•
AC/DC low voltage power input
•
Panel mount enclosure, IP40 for front panel
Further Feature (RDT 52B)
•
RS232 serial interface for PC or printer connection
•
Real-Time-Clock with battery back-up
•
Alibi memory for 10,000 registrations
•
Totalizing register
•
Selection of standard or user defined print formats
Accessories
•
RS485-RS232 converter including power adapter 230VAC to 9VAC
•
Aluminium stand for table top mounting
•
Mains power adapter 230VAC to 9 V AC
MA5202 Weight Indicator
The MA5202 is a compact, powerful alphanumeric terminal, designed for numerous weighing applications, varying from a simple fixed tare weighing operation to powerful truck in/out management systems. User friendly configuration and operation, hardware and software reliability, and legal-for-trade accuracy in an attractive enclosure ensure high performance to meet the most demanding needs.
Applications
Legal for trade applications
•
Weighbridges, platform scales or dual scale applications requiring weight indication and professional documentation
•
Piece counting (single or dual scale configurations)
•
Computer based weighing systems
Basic Features
•
Approved for 10,000 divisions
•
upto 70 measurements per second
•
Alibi-memory for 10,000 records
•
Excitation for upto 10 strain gauge load cells. 3500 each (or more)
•
Large, 16 character LCD display (14.5mm) with status annunciators
•
27 keys membrane keyboard with tactile feedback
•
Single or dual interval! range
•
Analogue and digital filtering
•
Standard RS232 for PC or printer connection and RS232 or RS485 interface with networking capability
•
Tilt input (inhibits weighing when scale tilted)
•
2 opto-isolated weight set points
•
Real time clock
•
Stainless steel enclosure (IP65J)
Operation Keys
•
On / Off
•
Zero scale
•
Pre set tare key
•
Tare key (sets/resets indicator to net mode)
•
Print key (initiates printouts and adds to total)
•
1st and 2nd weighing
•
Piece counting (activates piece counting program)
•
Scale exchange key (selects the analogue input #1 or#2 to be displayed)
•
Menu dialogue selection
•
Alphanumeric data entry keys
Standard Supply includes:
•
Versatile stainless steel stand to mount at any angle
•
Windows-based PC software for downloading customized weigh ticket formats [via the standard RS232) plus set-up and calibration data (via the second serial interface)
The digital junction box is designed to connect upto 4 analogue load cells, and to offer the performance and the advantages of a digital load cell configuration.
RDT52 remote display terminal is designed as display and keyboard interface for Leon Engineering’s DJB. It provides 6-digit high visibility LED display with 5 status annunciators for the display of weight data and operator prompts. A keypad of 6 keys is used for operator interfacing.
The MA5202 is a compact, powerful alphanumeric terminal, designed for numerous weighing applications, varying from a simple fixed tare weighing operation to powerful truck in/out management systems. User friendly configuration and operation, hardware and software reliability, and legal-for-trade accuracy in an attractive enclosure ensure high performance to meet the most demanding needs.